Call us
Thermocouple Type N: Type N (Nicrosil/Nisil) thermocouple has a Nicrosil (nickel-14%, chromium-1.5%, and silicon) positive leg, and a Nisil (nickel- 4.5%, silicon-1%, and magnesium) negative leg.
Thermocouple Type S: Platinum/10% Rhodium positive leg, and a pure platinum negative leg. The temperature range for Type S is 0 – 1450°C (32 –
Thermocouple Type T: Type T (Copper-Constantan) thermocouples are suited for measurements in the −200 to 350°C (-330 to 660°F) range. They are often used as a
The table below shows a summary of the Sense of Sensors 10 Part guide on the different types of Thermocouples. For assistance in choosing the
Pyrosales was issued with the Australian / New Zealand Certification Scheme for: ‘Explosion-protected Electrical Equipment’ The AnzEx Certificate was issued on the basis of an
When installing sensors in a hazardous area, there is a requirement to install a sensor that is suitable and approved for use in that hazardous
Thermowells are recommended whenever a temperature element is to be inserted into a process where corrosion, pressure, abrasion, or shear forces may threaten the life
By J M SHANAHAN B.Sc., B.E. (SYD), CEO, Pyrosales Pty Ltd,Padstow,Australia This article describes the ways in which contact temperature sensors can be protected from
There are several methods to install fire survival cables. The Installation Instructions for MICC Fireproof Wiring Cable details the various methods and provides relevant information
Introduction Pyrosales supplies MICC Ltd mineral insulated cables with copper or special metal alloys capable of meeting all known fire, flame and oven tests. There
Copyright © 2022 Created by Pepper Digital
Disclaimer – Images for illustrative purposes only and may not be representative of the actual resolution of the camera shown.
